16bar HF Series Compressed Air Precision Filter

Why use compressed air post-processing equipment?

√ Compressed air is the second largest power source after electricity, with a variety of process air sources.

√ Most industrial compressed air operates at a pressure of about 7, 10 or 13 barg, and purification and separation equipment is usually designed around these operations. Some application industries such as food, beverage, laser cutting, etc. require higher working pressures. As the pressure increases, the concentration of pollutants in the compressed air will also increase.

√ Untreated compressed air will also contain many potential and harmful pollutants, which must be reduced to an acceptable level to protect the safety of users, improve the efficiency of corporate production equipment and reduce operating costs.

√ If these potential pollutants are not controlled, the company may face prosecution.

√ The HF series targets the medium-pressure needs of industries such as laser cutting, solves the problems of users in the application of compressed air, and improves production efficiency;

Product Features & Advantages

1. All housings are die-cast in one piece of aluminum alloy, with a solid structure and long service life. All shells are cleaned, degreased and treated with anti-corrosion before painting;

2. The shell has been subjected to pressure burst test. Under the pressure of 12Mpa, the maximum burst pressure is not less than 12Mpa;

3. High-quality filter material reduces air flow and pressure loss, the particle filtration efficiency reaches 99.99%, and the initial wet pressure drops to 0.2bar;

4. Precision thread processing technology, which is very convenient for operators to install;

5. The new parallel design reduces the installation and maintenance space and can be fixed on the wall;

6. The filter grades PF, AO, AA, ACS, AX, AR, AAR meet ISO8573.1-2010 standards;

7. FPM sealing ring improves air tightness and achieves better filtering performance;

8. The top cover made of PA + GF material can withstand a temperature of 240℃, can resist general acid and chemical corrosion, and has extremely strong hydrophobicity and oleophobicity;

9. 96% porosity for dust holding capacity, service life up to 6000-8000 hours, pressure loss 0.17-0.65 bar;

10. Double support mesh to ensure the strength of the element and protect the glass fiber material.

Product selection: